Embedded Wireless Solutions
Serving your wireless prototyping needs
The popular WT12 from Bluegiga made easier to use by EWS. This is a WT12 iWRAP 4.0 on a breakout board with all pins accessible through standard 0.100" pins. Perfect for prototyping on a breadboard.
$50.00
This is our breakout board for the powerful Bluegiga WT32 Bluetooth Audio Module (iWRAP version 4.0). Every pin on the WT32 is made accessible via standard 0.100 spaced pins, perfect for prototyping with a breadboard.
$60.00
This is our breakout board for the powerful Bluegiga WT41 Long Range Bluetooth Module (iWRAP version 4.0). Every pin on the WT41 is made accessible via standard 0.100" spaced pins, perfect for prototyping with a breadboard.
$70.00
Bluegiga WT12 Bluetooth Module
Bluegiga WT12 provides an ideal solution for developers that want to integrate Bluetooth wireless technology to their design with limited knowledge of Bluetooth and RF technologies.
$25.00
Bluegiga WT32 Bluetooth Module
WT32 is the latest generation of Bluetooth modules. It provides highest level of integration with integrated 2.4GHz radio, DSP, battery charger, stereo codec and antenna ready to hit mono and stereo audio applications.
$32.00
Locosys LS20126 Breakout Board
The popular LS20126 from Locosys made easier to use by EWS. This is an LS20126 on a breakout board with all pins accessible through standard 0.100" pins. Perfect for prototyping on a breadboard.
$69.00
The LOCOSYS LS20126 GPS smart antenna module is a high sensitivity, low power GPS receiver, supporting 20-channel L1 GPS. The module has both a built-in magnetic sensor and a 3-axial acceleration sensor, and incorporates a 10mm patch antenna.
$49.00
LS20031 is a complete GPS smart antenna receiver, including an embedded antenna and GPS receiver circuit, designed for a broad spectrum of OEM system applications. The product is based on the proven technology found in LOCOSYS 66 channel GPS SMD type receivers MC-1513 that use MediaTek chip solution.
$49.00
We have taken the popular RFM12B and made it easier to use by placing it on a breakout board with standard 0.100" pin spacing. This board is available with either a basic wire antenna or a planar antenna (shown with planar antenna).
$19.00
HopeRF's RFM22B are highly integrated, low cost, 433MHZ wireless ISM transceivers module. The low receive sensitivity(–121dBm) coupled with industry leading +20dBm output power ensures extended range and improved link performance. Built-in antenna diversity and support for frequency hopping can be used to further extend range and enhance performance.
$21.00
HopeRF's RFM12B is a single chip, low power, multi-channel FSK transceiver designed for use in applications requiring FCC or ETSI conformance for unlicensed use in the 433 MHz band. The RFM12B transceiver produces a flexible, low cost, and highly integrated solution that does not require production alignments.
$6.00
HopeRF's RFM22B are highly integrated, low cost, 433MHZ wireless ISM transceivers module. The low receive sensitivity(–121dBm) coupled with industry leading +20dBm output power ensures extended range and improved link performance. Built-in antenna diversity and support for frequency hopping can be used to further extend range and enhance performance.
$10.00
We have taken the popular RFM12B and made it easier to use by placing it on a breakout board with standard 0.100" pin spacing. HopeRF's RFM12B is a single chip, low power, multi-channel FSK transceiver designed for use in applications requiring FCC or ETSI conformance for unlicensed use in the 915MHz band.
$19.00
HopeRF's RFM22B are highly integrated, low cost, 915MHZ wireless ISM transceivers module. The low receive sensitivity(–121dBm) coupled with industry leading +20dBm output power ensures extended range and improved link performance. Built-in antenna diversity and support for frequency hopping can be used to further extend range and enhance performance.
$21.00
HopeRF's RFM12B is a single chip, low power, multi-channel FSK transceiver designed for use in applications requiring FCC or ETSI conformance for unlicensed use in the 915MHz band. The RFM12B transceiver produces a flexible, low cost, and highly integrated solution that does not require production alignments.
$6.00
HopeRF's RFM22B are highly integrated, low cost, 915MHZ wireless ISM transceivers module. The low receive sensitivity(–121dBm) coupled with industry leading +20dBm output power ensures extended range and improved link performance. Built-in antenna diversity and support for frequency hopping can be used to further extend range and enhance performance.
$10.00
RFM70 is a GFSK transceiver module operating in the world wide ISM frequency band at 2400 - 2483.5 MHz. Burst mode transmission and up to 2Mbps air data rate make them suitable for applications requiring ultra low power consumption. The embedded packet processing engines enable their full operation with a very simple MCU as a radio system.
$15.00
The RFM70 made easier to use on a breakout board with standard 0.100" headers. RFM70 is a GFSK transceiver module operating in the world wide ISM frequency band at 2400 - 2483.5 MHz. Burst mode transmission and up to 2Mbps air data rate make them suitable for applications requiring ultra low power consumption.
$5.00
XBee modules are embedded solutions providing wireless end-point connectivity to devices. These modules use the IEEE 802.15.4 networking protocol for fast point-to-multipoint or peer-to-peer networking. They are designed for high-throughput applications requiring low latency and predictable communication timing.
$29.00
XBee Pro Series 1 Breakout Board
The XBee PRO is just like the XBee Series 1 but with much greater range and greater sensitivity.
$42.00
The EWS ATmega Board is packed with useful functionality to simplify and improve embedded project development. The board is based on the impressive ATMEGA1284P microcontroller (128K Flash, 16K RAM, 4K EEPROM).
$30.00
Here is the ATMEGA32U4 from Atmel, offered on a Breakout Board with standard 0.100" headers, perfect for a breadboard. This is a handy MCU from Atmel, offering everything that you love in an ATMEGA chip, plus USB!!!
$18.00
EWS ATXmega32A4U Breakout Board
Here is the ATXMEGA32A4 from Atmel (32K Flash, 4K RAM, 1K EEPROM), offered on a Breakout Board. This is a great device from Atmel to get exposure to the XMEGA family. With 5 USARTS, 2 SPI ports, 2 TWI ports, 5 16-bit Timer/Counters, and a USB port, this MCU is loaded with functionality.
$20.00
EWS AT32UC3B1256 Breakout Board
Been looking for a low-cost introduction to the 32-bit family of microcontrollers from Atmel? Here is your chance. The AT32UC3B1256 is a fast, low-power 32-bit MCU and we have it for you on a breadboard-friendly Breakout Board!
$20.00
Our RS232 Board shifts RS232 signal levels to 3.3V or 5V levels usable by a microcontroller or other 3.3V or 5V device. This board utilizes the EXAR SP3232EB "True +3.0V to +5.5V RS-232” Transceiver (Driver outputs will meet levels of +/-3.7V with supply voltages of 2.7V, too), and offers TWO RS232 Tx/Rx channels.
$14.00
Our breadboard power supply is an easy way to supply your project with either 3.3V or 5V DC power. The board can be powered from either a USB port or a standard 120VAC wall outlet.
$10.00
The USB battery holder is great to use to power your electronics projects (or to just charge your phone or mp3 player, for that matter!). Definitely a must for powering wireless and mobile electronics projects. Works seamlessly with the EWS Breadboard Power Supply.
